offer wide variety of industrial steel sheets, industrial steel plates, industrial stainless steel sheets, industrial stainless steel plates, which are fabricated from finest quality of raw materials. Manufactured as per the international quality and safety standards, we offer these products in different dimensions and at highly competitive prices. These products are mostly applied in construction and engineering industry.
Range
|
0.4MM to 150MM Thickness in Sheets, Plates & Coilss |
|---|---|
Type
|
Coil, Foil, Roll, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flat, Blank (Circle), Ring (Flange) |
Materials Of Construction
Stainless Steel
|
ASTM A240, TP304, 304L, 304H, 316, 316L, 316H, 316Ti, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 904L, 202 |
|---|---|
Carbon Steel
|
ASTM A516 Gr. 60 & Gr. 70 / IS2062 / EN-8 / C-45 / Sail Hard |
Titanum
|
ASTM B265 Gr. - 1, 2, 3, 5 (6AL - 4V), 7,9,11,12,23 (6AL - 4V ELI) |
High Nickel Alloys
|
Hastelloy, Nickel, Monel, Inconel, Incoloy, Alloy-20 & Cupro Nickel |
Duplex
|
ASTM A815 / UNS S31803 & S32205 (2205) |
Super Duplex
|
ASTM A815 / UNS S32750 (2507) & S32760. |
Alloy Steel
|
ASTM A387 Gr. 5, Gr. 9,Gr. 11, Gr. 12, Gr. 22, Gr. 91 - Class 2 |
Other
|
CRCA, Spring Steel, Silver Steel & Hardox |
| Finish | 2B, 2D, HRAP, CR, BA (MATT NO 4 & NO 8), Plastic Coated |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard. |
TEST CERTIFICATES
|
MTC, IBR & Third Party Inspection |
Stainless & Duplex Steel
Range :
0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s.
Stainless Steel :
ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 ,316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430
Duplex Steel :
MASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.Carbon & Alloy Steel
RANGE :
3 mm to 100 mm thick in upto 2500 mm width upto 12500 mm lengthavailable with NACE MR 01-75s
Carbon Steel :
ASTM / ASME A 516 / 517 GR. 60 / 70 , IS 2062 , IS 2002
Alloy Steel :
ASTM / ASME A 387 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.
Nickel & Copper Alloy
Range
5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.Nickel Alloy :
ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 127UNS 4400 (MONEL 400 )
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Hastelloy
Grades :
Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000Form: :
Hastelloy Sheet• Hastelloy Coil
• Hastelloy Strips
• Hastelloy Plates
• Hastelloy Circle
• Hastelloy Ring
Inconels
Grade :
Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel718, Inconel 800, Inconel 825, Inconel X-750
Standard :
ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443Incoloy
Grade :
Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DSType :
Seamless / Erw / Welded/ FabricatedStandard :
ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751This range is used in :
• Petrochemicals Plants
• Oil Refineries
• Fertilizers Plants
• Sugar Mills
• Chemical Plants
• Pharmaceuticals
• Textile Machinery
Monel
Stainless Steel :
ASTM A 182, A 240Grades :
Monel 400, Monel k500Type :
Seamless / Erw / Welded/ FabricatedForm :
Round, Square, Rectangular, Hydraulic etc.Length :
Single Random, Double Random & Cut LengthEnd :
Plain End, Beveled End, ThreadedThe salient features are as follows :
• Hot Dipped Galvanizing
• Epoxy & Fbe Coating
• Electro Polish
• Draw & Expansion
Titanium
Specifications :
1)hot and coll rolled, Gr1~Gr23
2)Thickness:0.3mm - 60mm
3)Length:<6000mm
4)ASTM B265,ASTM 4911,F67,F136
1.material:titanium and titanium alloys
pure titanium grade: GR1, GR2, GR3, GR4
titanium alloy grade: GR5 (6% Al, 4%V)
GR6 (5% AL, 2.5%Sn)
Gr.7 (Titanium + Pd)
Gr.9 (3% Al, 2.5%V)
Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)
Gr.11 (Titanium + Pd)
Gr.12 (0.3% Mo, 0.8% Ni)
| Common Specification: | Specification: | Product Form |
| ASTM B265(Gr2) | Sheet,Strip and Plate | |
| ASTM B338 | Tube,Seamless and Welded | |
| ASTM B348(Gr2) | Bars and Billets | |
| ASTM B861 | Seamless Pipe | |
| ASTM B863 | Wire | |
| ASTM F67(Gr2) | Unalloyed Titanium for Surgical Implants |
Tantalum
Specifications :
tantalum sheet, tantalum plate, tantalum foil
Grade :
RO5200, Ro5400,RO5252,RO5255Standard :
ASTM B708-98Size:
T0.1-10.0mm We are factory specializing in the manufacture and export Tantalum and Niobium prodcut for more than ten years,Including foil tube ,rod,wire,sheet,plate, ,rod,strip,target and so on
We can supply the best quallity and low price.
Tantalum sheets, Tantalum- tungsten alloy sheets(Ta2.5W, Ta10W)
Purity:
99.95%min or 99.99%min conformity with ASTM B 708 98Size
| Thickness (mm) | Width (mm) | Length (mm) | |
| Foil | 0.03-0.09 | 30-600 | 100 |
| Sheet | 0.1-0.5 | 30- 609.6 | 30-1000 |
| Board | 0.5-10 | 50-1000 | 50-2000 |